3.7V 350mAh 503030 Lithium Polymer Battery
Lithium ion polymer (also known as ‘lipo’ or ‘lipoly’) batteries are thin, light and powerful. The output ranges from 4.2V when completely charged down to 3.0V(standard)or 2.75V.
All of our lipo batteries come with or without pre-attached any connector like JST,XH,SH, NTC functions optional, as well as necessary protection circuitry.
Cell Type: Lithium Polymer Battery
Voltage(V): 3.7V
Nominal Capacity(mAh):350mAh
Standard Charge Current: 0.2C
Standard Discharging Current: 0.2C
Max Discharge Current: 1C (not continuous)
Charge Temperature(℃): 0~55℃
Discharge Temperature(℃): -20~65 ℃
Storage Temperature(℃): -20~45 ℃
Impedance: <40mΩ
Weight: 4.5±1g
Lifetime: 500 cycles
Battery Dimension: 5*12*40 mm (By Thickness*Width*Length):
Cable Length (Default): 100mm
(Notes: Battery with PCM will generally 2mm longer than Just bare cell)
Standard battery comes with PCM and wire, Bare cell can also be provided.
PCM Details:
Standarded PCM: protect the lipo battery from overcharging, over-discharging,short-circuit and reverse polarity.
Over Charge Protection
Over charge detection voltage: 4.25±0.05V
Over charge detection delay time: 1.0±0.3S
Over charge release voltage: 4.05±0.05V
Over discharge protection
Over discharge detection voltage:2.5±0.1V
Over discharge detection delay time:20±6.0mS
Over discharge release voltage:3.0±0.075V
Over current protection
Over current detection voltage:0.2±0.015V
Over current detection current: 3.0~6.0A
Detection delay time:12±4.0mS
Release condition: Cut load
Short Circuit Protection
Detection condition: Exterior short circuit
Detection delay time: 230~500uS
Release condition: Cut short circuit
Interior resistance
Main loop electrify resistance: VC=4.2V;RSS≤70mΩ
Current Consumption
Current consume in normal operation: 4.0μA Type 8.0μA Max
Connector Types:
JST, Molex, Hirose etc
Download
Datasheet
Certificates
Other Batteries:
FAQ
Q: What is your MOQ?
Q: How do we place an sample order?
A: Please kindly send us your battery requirement
1 battery discharging current
2 battery capacity
3 battery dimension
4 potential bulk order quantity
and we will find the most suitable solution for you, you can then pay us by PayPal or Credit card.
A: 100 PCS per SKU.
Q: What’s the delivery time?
A: The delivery time is 7-15 days after your payment.
Below is timeline for your refrencer
USA: 5-8 days
EU/UK: 7-10 days
AU/New Zealand: 5-8 days
Canada: 15days
Japan/Korea/Singapore/Malaysia: 3-4 days
Q: How would the batteries be shipped?
A: We ship via UPS, DHL, FedEx for urgent orders, and most of our clients would choose to ship by air and local Fedex or UPS to save cost .
Q: Can I track my shipment?
A: Yes, we will send you the tracking No. after your batteries shipped.
Q: Can you make customized lipo battery?
A: Yes, we can custom lipo battery as per your design. Mainly like follows
1 Custom battery dimension
2 Custom battery capacity
3 Custom battery discharging current(up to 150C)
4 Custom battery PCM, like NTC or other features
5 Custom battery discharging temerature as lower as -60°C
6 Custom battery shape, like Curved Lipo Battery, Round Lipo Battery,Polygonal Lipo Battery, Triangle Lipo Battery, Rectangle Lipo Battery, Hexagon Lipo Battery ,C Shape Lipo Battery D Shape Lipo Battery
Q: What is the lead time for mass production?
A: It depends on the actual situation: if with stock, the lead time will be 7~10 days.
If without stock, that will depend on your order quantity, usually within 15-30 days.
Q: Is there any warranty or after-sales service?
A: 15 months warranty against defective lipo batteries,starting from shipping date.
Q: Can you explain more on how would you warranty your Lipo Battery?
A: For each shipment, we have SN or production number with it, once defective within 15 months, we will send new replacement or refund for the defective part.
Q: How do we make the payment?
A: We accept T/T, Western Union, PayPal, if you prefer other payment, please contact us.
Q: Can we get some Lipo Battery samples for test?
A: Sure, Lipo Battery Samples are always available for you, but the sample cost and freight cost should be paid.
Q: Can your factory print our logo/brand on the product?
A: Yes, and we will do this free of charge.
There are no reviews yet.